EBS

Stanley Clarke Signature Acoustic Preamp

Highlights

  • Acoustic Preamp
  • Channels: 2-channel analog, A/B or A+B
  • Signal quality: studio-grade
  • Filters: individual high-pass/notch per channel
  • Channel A: electret pickup support, 5 V / 2 mA
All highlights
RRP €479.00 incl. VAT
Item number
SCSP
EAN
7332100450106

Highlights

  • Acoustic Preamp
  • Channels: 2-channel analog, A/B or A+B
  • Signal quality: studio-grade
  • Filters: individual high-pass/notch per channel
  • Channel A: electret pickup support, 5 V / 2 mA
  • Channel B: balanced XLR input, −30 dBV nominal, 48 V phantom power
  • Input impedance: 10 MΩ, 22 pF per channel
  • Gain range: −∞ to +30 dB
  • Peak indicator: gain-peak LED at +10 dBV (channel A red, B yellow)
  • Frequency response: 20 Hz–20.000 Hz, +0/−3 dB
  • Bass filter: shelving, ±15 dB at 40 Hz
  • Mid filter: band-pass, ±13 dB, 70–2.500 Hz, Q 0.8
  • Treble filter: shelving, ±15 dB at 10 kHz
  • High-pass filter: 12 dB/octave, 20 Hz (off)–450 Hz
  • Notch filter: band-pass notch, 70–2.200 Hz, Q 7, typical attenuation 7 dB
  • Tuner output: available
  • Effects loop: −10 dBV nominal, unity gain (1:1), 2 kΩ output, 100 kΩ input, serial/parallel
  • Aux input: 20 kΩ, −10 dBV nominal
  • Phones out: recommended 32–200 Ω
  • Output: 1 kΩ, 0 dBV nominal
  • Balanced output: −20 dBV nominal, XLR pin 1 ground / 2 hot / 3 cold, ground lift and speaker simulation
  • Power conversion: external 9 V DC converted to internal ±15 V rails
  • Power draw: 500 mA idle at 9 V, max. 800 mA at 9 V with headphones at maximum output
  • Weight: 660 g (1.5 lb)
  • Dimensions: max. 168 × 124 × 53 mm (6.6 × 4.9 × 2.1 inches)
  • Early units: 48 V phantom power is always on
  • Microphone caution: avoid passive ribbon microphones via XLR
The Stanley Clarke Signature Acoustic Preamp is a two-channel analog preamp that can run in A/B or A+B mode. Individual high-pass and notch filters are available for each channel. Channel A supports an electret pickup, while channel B provides an XLR microphone input with 48 V phantom power. Tuner out, an effects loop with serial or parallel routing, Aux input, headphone output and balanced output support a range of stage and studio setups. The balanced output includes speaker simulation and ground lift. An external 9 V DC supply is converted internally to ±15 V rails. Early units have always-on phantom power, so passive ribbon microphones should not be connected through XLR. A dedicated 9 V DC power supply is included.

Technical data

Product TypeAcoustic Preamp
ChannelsTwo-channel analog; A/B or A+B
Input Impedance10 MΩ; 22 pF per channel
Gain Range−∞ to +30 dB; peak LED at +10 dBV (A red; B yellow)
Frequency Response20 Hz–20.000 Hz; +0/−3 dB
Bass FilterShelving; ±15 dB at 40 Hz
Mid FilterBand-pass; ±13 dB; 70–2.500 Hz; Q 0.8
Treble FilterShelving; ±15 dB at 10 kHz
High-Pass Filter12 dB/octave; 20 Hz (off)–450 Hz
Notch FilterBand-pass notch; 70–2.200 Hz; Q 7; typically 7 dB attenuation
Channel A Electret Power5 V; 2 mA
Channel B Balanced Input−30 dBV nominal; XLR pin 1 ground, 2 hot, 3 cold; 48 V phantom power
Effects Loop−10 dBV nominal; unity gain (1:1); 2 kΩ output; 100 kΩ input; serial/parallel
Aux Input20 kΩ; −10 dBV nominal
Phones OutputRecommended impedance 32–200 Ω
Output1 kΩ; 0 dBV nominal
Balanced Output−20 dBV nominal; XLR pin 1 ground, 2 hot, 3 cold; ground lift; speaker simulation
Power ConversionExternal 9 V DC to internal ±15 V rails
Power Draw500 mA idle at 9 V; max. 800 mA at 9 V with headphones at maximum output
Weight660 g (1.5 lb)
DimensionsMax. 168 × 124 × 53 mm (6.6 × 4.9 × 2.1 inches)

In the box

  • Preamp
  • Netzteil 9 V DC

Downloads

About the brand

EBS Sweden AB was founded in 1988 by CEO Bo L. Engberg and Technical Director Mats Kristoffersson, with the introduction of the legendary EBS-1 rack-mounted preamp.


Since then, EBS has designed professional sound equipment for bass players, including amplifiers, effects, and space-saving pedalboard accessories, such as the renowned EBS flat patch cables.

EBS builds more than bass gear; we craft sonic environments where bass thrives. Every EBS amp delivers a powerful, solid, low-end tone with filters to sculpt the body, and the headroom to express your whole character. Our pedals expand that space, adding new dimensions to your sound, while the accessories save space on your board. It’s not just gear. It’s where you, as a bass player comes alive.


Our goal is to provide the tools necessary to help you improve, maintain, develop, and enjoy yourself and your sound throughout the journey from ambitious beginner to professional musician.


If you mean it, don’t play without it!