EBS

EBS SCSP简体中文(大陆)

亮点

  • Acoustic Preamp
  • Channels: 2-channel analog, A/B or A+B
  • Signal quality: studio-grade
  • Filters: individual high-pass/notch per channel
  • Channel A: electret pickup support, 5 V / 2 mA
全部亮点
建议零售价 €479.00 含增值税
货号
SCSP
EAN
7332100450106

亮点

  • Acoustic Preamp
  • Channels: 2-channel analog, A/B or A+B
  • Signal quality: studio-grade
  • Filters: individual high-pass/notch per channel
  • Channel A: electret pickup support, 5 V / 2 mA
  • Channel B: balanced XLR input, −30 dBV nominal, 48 V phantom power
  • Input impedance: 10 MΩ, 22 pF per channel
  • Gain range: −∞ to +30 dB
  • Peak indicator: gain-peak LED at +10 dBV (channel A red, B yellow)
  • Frequency response: 20 Hz–20.000 Hz, +0/−3 dB
  • Bass filter: shelving, ±15 dB at 40 Hz
  • Mid filter: band-pass, ±13 dB, 70–2.500 Hz, Q 0.8
  • Treble filter: shelving, ±15 dB at 10 kHz
  • High-pass filter: 12 dB/octave, 20 Hz (off)–450 Hz
  • Notch filter: band-pass notch, 70–2.200 Hz, Q 7, typical attenuation 7 dB
  • Tuner output: available
  • Effects loop: −10 dBV nominal, unity gain (1:1), 2 kΩ output, 100 kΩ input, serial/parallel
  • Aux input: 20 kΩ, −10 dBV nominal
  • Phones out: recommended 32–200 Ω
  • Output: 1 kΩ, 0 dBV nominal
  • Balanced output: −20 dBV nominal, XLR pin 1 ground / 2 hot / 3 cold, ground lift and speaker simulation
  • Power conversion: external 9 V DC converted to internal ±15 V rails
  • Power draw: 500 mA idle at 9 V, max. 800 mA at 9 V with headphones at maximum output
  • Weight: 660 g (1.5 lb)
  • Dimensions: max. 168 × 124 × 53 mm (6.6 × 4.9 × 2.1 inches)
  • Early units: 48 V phantom power is always on
  • Microphone caution: avoid passive ribbon microphones via XLR
The Stanley Clarke Signature Acoustic Preamp is a two-channel analog preamp that can run in A/B or A+B mode. Individual high-pass and notch filters are available for each channel. Channel A supports an electret pickup, while channel B provides an XLR microphone input with 48 V phantom power. Tuner out, an effects loop with serial or parallel routing, Aux input, headphone output and balanced output support a range of stage and studio setups. The balanced output includes speaker simulation and ground lift. An external 9 V DC supply is converted internally to ±15 V rails. Early units have always-on phantom power, so passive ribbon microphones should not be connected through XLR. A dedicated 9 V DC power supply is included.

技术参数

Product TypeAcoustic Preamp
ChannelsTwo-channel analog; A/B or A+B
Input Impedance10 MΩ; 22 pF per channel
Gain Range−∞ to +30 dB; peak LED at +10 dBV (A red; B yellow)
Frequency Response20 Hz–20.000 Hz; +0/−3 dB
Bass FilterShelving; ±15 dB at 40 Hz
Mid FilterBand-pass; ±13 dB; 70–2.500 Hz; Q 0.8
Treble FilterShelving; ±15 dB at 10 kHz
High-Pass Filter12 dB/octave; 20 Hz (off)–450 Hz
Notch FilterBand-pass notch; 70–2.200 Hz; Q 7; typically 7 dB attenuation
Channel A Electret Power5 V; 2 mA
Channel B Balanced Input−30 dBV nominal; XLR pin 1 ground, 2 hot, 3 cold; 48 V phantom power
Effects Loop−10 dBV nominal; unity gain (1:1); 2 kΩ output; 100 kΩ input; serial/parallel
Aux Input20 kΩ; −10 dBV nominal
Phones OutputRecommended impedance 32–200 Ω
Output1 kΩ; 0 dBV nominal
Balanced Output−20 dBV nominal; XLR pin 1 ground, 2 hot, 3 cold; ground lift; speaker simulation
Power ConversionExternal 9 V DC to internal ±15 V rails
Power Draw500 mA idle at 9 V; max. 800 mA at 9 V with headphones at maximum output
Weight660 g (1.5 lb)
DimensionsMax. 168 × 124 × 53 mm (6.6 × 4.9 × 2.1 inches)

包装清单

  • Preamp
  • Netzteil 9 V DC

下载

关于品牌

EBS Sweden AB 由首席执行官 Bo L. Engberg 和技术总监 Mats Kristoffersson 于 1988 年创立,并推出了传奇的 EBS-1 机架式前置放大器。


自那时起,EBS便致力于为贝斯手设计专业音响设备,包括功放、效果器以及节省空间的踏板架配件,例如广受赞誉的EBS扁平音频线。EBS不仅制造贝斯装备,更致力于打造让贝斯音色尽情绽放的声学环境。 每一台EBS音箱都能呈现强劲、扎实的低频音色,配备可雕琢音色的滤波器,并拥有充足的动态余量,助您尽情展现个人风格。我们的效果器拓展了这一空间,为您的音色增添新的维度,而各类配件则能为您节省踏板架空间。这不仅仅是器材,更是您作为贝斯手焕发活力的舞台。


我们的目标是提供必要的工具,帮助你在从充满抱负的新手到职业音乐家的整个历程中,不断提升、保养、发展并享受自己和你的音色。若你真心热爱,切勿缺它而演奏!