Video & Camera Microphones Keep browsing

RØDE

VideoMic Pro Rycote

RRP €262.99 incl. VAT
Item number
VMPR
EAN
698813004195
Directional Microphone for Camera Mounting


Measuring just 15 cm in length and weighing only 85 g, the VideoMic Pro Rycote is a professional mono camera microphone that can significantly enhance the quality of your video audio. It slides easily into a standard hot shoe and locks into place with the integrated knurled nut. Alternatively, it can be mounted on a tripod, a handle, or a boom pole; the base features a 3/8-inch threaded socket. Thanks to the Rycote Double “Lyre”—a special thermoplastic vibration-isolation mount—the VideoMic Pro is optimally decoupled from the camera. This prevents structure-borne noise and handling noise from reaching the microphone’s sensitive 1/2-inch condenser capsule.

The VideoMic Pro Rycote is powered by an optional 9V block battery, which lasts for 70 hours. It connects to the camera via a permanently integrated 3.5 mm TRS jack cable. The tip (“T”) and ring (“R”) of the connector carry exactly the same signal, so the camera records in dual-mono mode and the sound comes from exactly the center when the video is played back.

The Rycote VideoMic Pro’s supercardioid capsule has a relatively narrow pickup angle of approximately 45°. If you hold both hands out in front of you at a right angle, you can clearly see which sound sources are within the pickup pattern and will therefore be prioritized in the recording. As a mono directional microphone, the Rycote VideoMic Pro is generally recommended for voice recordings, as well as for any other type of sound source located directly in front of you—that is, on-axis within the frame. It’s ideal for close-ups in particular: sound coming in from the sides from sources not visible in the frame is largely ignored.

There are two switches on the back of the Rycote VideoMic Pro: the power switch and the level switch. The power switch also activates the rumble filter (“high-pass filter”), which reduces low-frequency noise. In practice, this makes the film audio sound clearer and also improves speech intelligibility. However, if low frequencies are an important component of the sound source, you should not enable the high-pass filter.

Thanks to its low self-noise (14 dBA) and high maximum sound pressure level (134 dB), the VideoMic Pro Rycote can handle both very quiet and very loud signals flawlessly and without noise. Many cameras, on the other hand, cannot do this and either add ugly noise to the recorded signal (when the input signal is too quiet, due to clipping or automatic level control) or introduce distortion (when signals are too loud). You can counteract this by setting the level switch—the lower of the two—from the default “0” to “+20” to bring quiet signals (e.g., speech) into a healthy range, or to “-10” to attenuate very loud signals so that the camera’s microphone input does not clip.

The Rycote VideoMic Pro comes with a pre-mounted foam windscreen. It is manufactured by RØDE in Australia, and registered users receive a 10-year warranty. For outdoor recording, we recommend purchasing the optional “Dead VMPR” fur windscreen.

Technical data

  • Typ: Kameramikrofon (Rycote Lyre)
  • Kapsel: 0,5″
  • Prinzip: Interferenzprinzip
  • Frequenzbereich: 40 Hz–20 kHz (Hochpass 80 Hz)
  • Ausgangsimpedanz: 200 Ω
  • Max. SPL: 134 dB
  • Empfindlichkeit: -32 dB re 1 V/Pa (20 mV @ 94 dB SPL)
  • Eigenrauschen: 14 dBA
  • Maße (H × B × T): 100 × 75 × 170 mm
  • Gewicht: 85 g

In the box

  • 1× VideoMic Pro

About the brand

RØDE – an audio company in the heart of Australia

RØDE is a global leader in audio technology, with a mission to give voice and vision to the world’s creative minds. With a rich history dating back more than 50 years, RØDE is a wholly Australian-owned and operated company with a passion for innovation, an uncompromising commitment to quality, and a lasting dedication to making exceptional sound accessible to everyone

RØDE’s state-of-the-art facility is located in Silverwater, a suburb less than 20 km from downtown Sydney. Three manufacturing facilities covering a floor area of more than 25,000 m² house precision machinery valued at over 500 million dollars. RØDE and CEO Peter Freedman employ an international team of more than 800 employees, including highly qualified specialists in electrical engineering, industrial design, mechanical engineering, robotics, audio and acoustics, metal fabrication, toolmaking, injection molding, quality control, and marketing.

RØDE Microphones is a wholly owned subsidiary of Freedman Electronics, a company founded in 1967 by Henry and Astrid Freedman that soon became a leader in the Australian audio industry. In 1990, Henry’s son Peter began manufacturing studio microphones. The “NT1” model marked the birth of RØDE Microphones: for the first time, there was a usable large-diaphragm studio microphone available at an affordable price.

Today, RØDE can look back on a truly remarkable and highly successful journey, without resting on its laurels. Over the years, new product lines have been steadily added, so that today, in addition to studio microphones and accessories, RØDE also offers professional products for radio, television, feature film production, musicians, podcasters, gamers, content creators, and other users.

From its humble beginnings as a storefront in 1967, Freedman Electronics has grown over the decades into the Freedman Group, one of the world’s leading suppliers of pro audio equipment. In addition to its headquarters in Sydney, RØDE maintains offices around the world, including in the U.S., China, and the U.K. RØDE products are exported to 119 countries worldwide.

RØDE is part of the Freedman Group—along with Mackie, APHEX, Event, and SoundField.